Toshiba TDP-P75 User Manual - Page 40

Indicator lights, When the projector is in a normal state

Page 40 highlights

English Indicator lights The front of the projector has three lights that indicate its status. Check the following for information about the indicator lights. If an abnormal condition is indicated, turn off the projector and contact your dealer. When the projector is in a normal state: POWER TEMP LAMP State Remark Orange Off Flashing Green Off Green Off Flashing Orange Off Off Standby mode --- The projector is powering Cannot turn off the Off up. projector. The projector is under Off normal operation. --- Off The projector needs to cool down for 90 seconds after the power is turned off. Cannot turn on the projector. When the projector is in an abnormal state: POWER Off Red Red Red Off Off Green Green TEMP Off Red Red Red Red Red Red Red LAMP State Remark The lamp has exceeded its Solution: Red usage life. • Install a new lamp. Off Green Red Off Green Off Green Solution: • Make sure the ventilation holes are not blocked. The internal temperature is • Relocate the projector. too high. • Stop using the projector • The intake ventilation or until the ambient the exhaust ventilation is temperature falls within blocked. the specified range. The • The projector may be in a maximum operating poorly ventilated location. temperature is specified • The ambient temperature as 35°C (95°F). may be too high. • Make sure the power The fans are not working. supply is stable. • Check if there is an obeject stuck in the fans. • Contact your dealer. 40 Additional Information

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45

Additional Information
40
English
Indicator lights
The front of the projector has three lights that indicate its status. Check the
following for information about the indicator lights. If an abnormal condition is
indicated, turn off the projector and contact your dealer.
When the projector is in a normal state:
When the projector is in an abnormal state:
POWER
TEMP
LAMP
State
Remark
Orange
Off
Off
Standby mode
---
Flashing
Green
Off
Off
The projector is powering
up.
Cannot turn off the
projector.
Green
Off
Off
The projector is under
normal operation.
---
Flashing
Orange
Off
Off
The projector needs to cool
down for 90 seconds after
the power is turned off.
Cannot turn on the
projector.
POWER
TEMP
LAMP
State
Remark
Off
Off
Red
The lamp has exceeded its
usage life.
Solution:
Install a new lamp.
Red
Red
Off
The internal temperature is
too high.
The intake ventilation or
the exhaust ventilation is
blocked.
The projector may be in a
poorly ventilated location.
The ambient temperature
may be too high.
The fans are not working.
Solution:
Make sure the ventilation
holes are not blocked.
Relocate the projector.
Stop using the projector
until the ambient
temperature falls within
the specified range. The
maximum operating
temperature is specified
as 35°C (95°F).
Make sure the power
supply is stable.
Check if there is an
obeject stuck in the fans.
Contact your dealer.
Red
Red
Green
Red
Red
Red
Off
Red
Off
Off
Red
Green
Green
Red
Off
Green
Red
Green