Toshiba TDP-P75 User Manual - Page 20

English Preparing and using the remote control (Continued) Q Switching operation modes Operation modes should be switched between projector operation and computer operation. Switching the remote control operation mode. Pressing this button toggles the mode. When this button is lit, the remote control is in [PJ Mode] (Projector operation mode). If no operations are made for 30 seconds, this light goes out, and the remote switches back to [PC Mode] (Computer operation mode). [PJ Mode] : Functions as a select button. If no menu is displayed, adjusts volume. [PC Mode] : Functions as a mouse pointer control. PJ MODE R-CLICK ESC INPUT AUTO MENU Pressing displays a laser pointer, regardless of the mode. [PC Mode] : Functions as a down button. Used to go forward on Microsoft® PowerPoint® slides, etc. [PC Mode] : Functions as an up button. Used to go back on Microsoft® PowerPoint® slides, etc. FREEZE [PC Mode] : Functions as the right mouse button (R-CLICK). [PC Mode] : Functions as a ESC button. Pressing one of these buttons automatically sets the remote control to [PJ Mode]. If no operations are made for 30 seconds, and the remote switches back to [PC Mode]. The L-CLICK (left click) button on the back of the remote control functions when in [PC Mode]. Notes • With the exception of operating a PC with the remote control, all buttons are used in [PJ Mode]. • Make sure there is nothing between the remote control and the IR sensor on the projector that might obstruct the infrared beam. 20 Overview