Toshiba TDP-P75 User Manual - Page 22

English Positioning your projector Choosing a location Your projector is designed to be installed in one of four possible installation locations: 1. Floor in front of screen; 2. Ceiling in front of screen; 3. Floor at rear of screen; 4. Ceiling at rear of screen. Your room layout or personal preference will dictate which installation location you select. Take into consideration the size and position of your screen, the location of a suitable power outlet, as well as the location and distance between the projector and the rest of your equipment. I. Floor front: Select this location with the projector placed near the floor in front of the screen. This is the most common way to position. II. Ceiling front: Select this location with the projector suspended from the ceiling in front of the screen. Set in the Default setting > Projection mode menu after you turn the projector on. III. Floor rear: Select this location with the projector placed near the floor behind the screen. Set in the Default setting > Projection mode menu after you turn the projector on. IV. Ceiling rear: Select this location with the projector suspended from the ceiling behind the screen. Set in the Default setting > Projection mode menu after you turn the projector on. WARNING • Always obey the instructions listed in IMPORTANT SAFETY INSTRUCTIONS when placing the unit. Attempting to clean/replace the lamp at a high site by yourself may cause you to drop down, thus resulting in injury. • If you wish to mount the projector on the ceiling, be sure to ask your dealer to do so. Mounting the projector on a ceiling requires special ceiling brackets (sold separately) and specialized knowledge. Improper mounting could cause the projector to fall, resulting in an accident. 22 Overview