Tripp Lite 9PX11K Eaton 9PX 8000 9PX 11000 9PX EBM 240V Installation and User - Page 43

ENGLISH 9. Specifications Table 6. Electrical output All models Normal mode Battery mode Voltage regulation ±1% ±1% Efficiency > 98% (High Efficiency mode) > 94.5% for 8kVA models > 95% for 11kVA models > 91% Frequency regulation Sync with line ±5% of nominal line frequency (outside this range: ±0.5% of auto-selected nominal frequency) ±0.5% of auto-selected nominal frequency Nominal output 200V*, 208V*, 220V*, 230V, 240V, 250V* (voltage configurable) 8000/11000VA* 7200/10000W* Frequency 50 or 60Hz, autosensing or configurable as a frequency converter Output overload 100-102% 102-110% 110-125% 125-150% > 150% : no alarm : load transfers to Bypass mode after 2 minutes : load transfers to Bypass mode after 1 minute : load transfers to Bypass mode after 10s : load transfers to Bypass mode after 500ms Output overload (Bypass mode) 100-125% : no alarm 125-150% : UPS shuts down after 1 minute > 150% : UPS shuts down after 1s Voltage waveform Sinewave Harmonic distortion < 2% THDV on linear load < 5% THDV on non-linear load Transfer time Online mode: 0 ms (no break) High Efficiency mode: 10ms maximum (due to loss of utility) Power factor 0.9 Load crest ratio 3 to 1 * 200/208/250V are derated at 10000VA 9000W, 220V is derated at 9900W for 11kVA models. Table 7. Electrical output connections Model Output connection 9PX8KPM Hardwired 9PX11KPM Table 8. Environmental and safety EMC certifications EMC (Emissions)* EMC (Immunity) * for output cable < 10m. IEC/EN 62040-1: 2008 IEC/EN 62040-2: 2006 Cat. C2 IEC/EN 62040-3: 2011 IEC 60950-1 UL 1778 4th CSA 22.2 CISPR22 Class A AS/NZS 22 Class A IEC 61000-3-2 (-3-12) IEC 61000-3-3 (-3-11) FCC part 15 Class A IEC 61000-2-2 IEC 61000-4-2, Level 3 IEC 61000-4-3, Level 3 IEC 61000-4-4, Level 4 (also on signal ports) IEC 61000-4-5, Level 4, Criteria B IEC 61000-4-6, Level 3 IEC 61000-4-8, Level 4 IEC 61000-4-11 8-11kVA US_EN Page 43