Troy-Bilt Pro-Line CRT Service Manual - Page 23
Troy-Bilt Pro-Line CRT Manual
View all Troy-Bilt Pro-Line CRT manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 23 highlights
7.47. Remove the left and right tine shaft oil seals from the transmission using an oil seal removal tool. See Figure 7.47. Oil Seal Troy-Bilt Small Frame Tillers 7.49. Remove the external shims from the right and left hand sides of the tine shaft using a small hook tool and a stick magnet. See Figure 7.49. Tine Shaft Tine Shaft Figure 7.47 7.48. Remove the left and right retaining rings securing the tine shaft in position using medium retaining ring pliers. See Figure 7.48. External Shims Figure 7.49 NOTE: Two paper clips with a small 90° bend at the end works well for external shim removal. 7.50. Measure the overall thicknesses of the left and right shim washers using a dial caliper. See Figure 7.50. Retaining Ring Dial Caliper Tine Shaft Figure 7.48 Shims Figure 7.50 7.51. Record the overall thicknesses of the shim washers, Right _____, Left _____. 19