Troy-Bilt Pro-Line CRT Service Manual - Page 5
Troy-Bilt Small Frame Tillers - rear tine tiller
View all Troy-Bilt Pro-Line CRT manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 5 highlights
Troy-Bilt Small Frame Tillers Troy-Bilt Small Frame Tillers TUFFY TILLER ABOUT THIS SECTION: NOTE: This section covers the Tuffy rear tine tiller, model 21A-630B063 with Serial Number 1B212G80447. This section has been technically written to follow along with the Troy-Bilt Factory School. UNIT FEATURES: • 3.75 Hp, 4-cycle engine • Power forward • 14" tilling width • 10" tine diameter • Adjustable tilling depth up to 6" • 10" Agricultural Tires 1. ENGINE: 1.1. Identify the engine that is powering the tiller, and refer to the Engine Owner's Manual for more information. 2. FORWARD CLUTCH CABLE ADJUSTMENT: 2.1. Remove the spark plug boot from the spark plug, and ground it to the engine. See Figure 2.1. Spark Plug 2.2. Make certain the forward clutch bail is fully released. See Figure 2.2. Clutch Bail Fully Released Figure 2.2 2.3. Measure the overall length of the coils on the for- ward clutch spring with the forward clutch bail fully released using a dial caliper. See Figure 2.3. Spark Plug Boot Grounded Figure 2.1 Coil Length - Fully Released Figure 2.3 2.4. Record the forward clutch spring measurement _____. 1