Uniden 410 English Owners Manual - Page 13

PROGRAMMING PROGRAMMING THE TELEPHONE SETTING A PRIVATE LINE You must share lines 1 and 2 with all other stations in the system. However, you can create a non-square configuration as described on page 7 using lines 3 and/or 4, so that your station has different telephone number(s) from the other stations lines 3 and/or 4. More than one station can share a private line. CONFIGURE THE LINE CORDS OF YOUR UNIT INTO THE TELEPHONE LINES YOU WANT TO USE and follow the programming steps below. 1 . Press . 2 . PLEASE SELECT PHON TIME OTHER 3 . FLASH: 600MS BACK CHANGE NEXT 4 . AUTODIAL SETUP BACK ENTER NEXT 5 . RINGER SELECT BACK ENTER NEXT 9. OFF BACK SAVE ON/OFF 10. ON: SELECT LN34 BACK SAVE ON/OFF 3 and 4 will be flashing. Use the keypad to select the line or lines that will be private. Selected numbers will be displayed and flashing. 12. ON: SELECT LN34 BACK SAVE ON/OFF 6 . AUTOANSWER: ON BACK CHANGE NEXT 7 . ALWAYSRING: OFF BACK CHANGE NEXT 13. Press to exit. NOTES: ■ Two or more stations can share the same private line(s), but under this condition your private line calls will always be accessible (always be privacy released) to those stations. 8 . PRIV LINE: OFF BACK CHANGE NEXT SETTING AUTOMATIC ANSWER When auto answer is turned on and a station receives an intercom call, the station does not intercom ring. Instead, the speakerphone automatically answers the intercom call. To program the auto answer feature, 1 . Follow steps 1-5 above under "SETTING A PRIVATE LINE." 2 . Press the soft key under "CHANGE" to toggle between "ON" and "OFF." AUTOANSWER: ON BACK CHANGE NEXT 3 . Once your selection appears in the display, press to exit. 13