Uniden 410 English Owners Manual - Page 14
Setting The Outside Line, Setting The Area Code
View all Uniden 410 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 14 highlights
PROGRAMMING THE TELEPHONE SETTING THE OUTSIDE LINE If you must dial an outside line to access a dial tone, you can program the phone to automatically dial the outside digit when calling a stored caller ID record. 1 . Press . 2 . PLEASE SELECT PHON TIME OTHER 3 . CALLER ID BACK ENTER NEXT 4. CWCID ON BACK CHANGE NEXT 5 . SAVE: ALL BACK CHANGE NEXT 6 . OUTSIDE LINE:- BACK CHANGE NEXT Press the soft key under "CHANGE" until the correct digit is displayed. (0 1 2 3 4 5 6 7 8 9 ) NOTE: ■ If an outside line is not needed, make sure there is a "- " in the display. 7 . When the correct outside line digit appears in the display, press "NEXT" to save. 8 . Press to exit. PROGRAMMING SETTING THE AREA CODE The area code is always included in caller ID records with telephone numbers. When your local area code is programmed into the unit and you press to call a local caller ID record, the area code is automatically removed. If you must dial 10 or 11-digits when dialing from your area, leave the area code setting at 000. The unit will prompt you to choose between 7, 10, 11 or 8-digit dialing each time you make a caller ID call. If you reside in a 7-digit dialing area, the unit can make returning phone calls easier by automatically dialing stored Caller ID numbers. In order for this feature to work correctly, it is necessary to program your local area code into the unit. To program your local area code, 1 . Follow steps 1-5 above under "SETTING THE OUTSIDE LINE." 2 . OUTSIDE LINE:- BACK CHANGE NEXT 4 . AREA CODE: 310 BACK SAVE NEXT 5 . Press to exit. 3. Using the keypad, enter in your three digit area code. 14