Uniden 410 English Owners Manual - Page 44
Troubleshooting
View all Uniden 410 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 44 highlights
ADDITIONAL INFORMATION TROUBLESHOOTING PROGRAMMING I reconnected line 1 to the unit and now I cannot program the phone to it's existing ID. ■ Perform a system update at another station. I cannot access the program mode. ■ Did your station place a call on hold? Is a line indicator flashing green? ■ Is the station off hook? OPERATION My station does not receive PAGE ALL. ■ Check to see if DND (Do Not Disturb) is on. I cannot join a call in progress ■ Has the station originating the call released privacy? ■ Has another station already joined the privacy released call? The intercom feature does not work. ■ Is Line 1 common to all units that want to use the intercom feature? ■ Is the station you are intercomming in DND? I cannot view the activity of other stations. ■ Is Line 1 common to all units? One station's icon continues to appear in the display when the station is not in use. ■ Check to see if DND (Do Not Disturb) is on at that station. ■ Make sure the unit is still connected with the line and AC power. TELEPHONE The LINE INDICATOR flashes when a call comes in but the telephone does not ring. ■ Is your station off hook? Your station will not ring if your are on another line. ■ If you want your station to ring under the above two conditions, set ALWAYS RING: ON in programming. See page 15. ■ Check the ringer switch at the back of the unit. ■ Check the ringers for lines 1-4 in programming mode. ■ Are lines 3 and/or 4 set as private lines for other stations? See "SETTING A PRIVATE LINE" on page 13. ■ Check the PC/FAX switch (see page 9). There is no dial tone and the LCD is blank. ■ Check that the AC adapter is plugged in at both ends. ■ Verify that the AC outlet is working by plugging a lamp etc. into it. Callers cannot hear me when using the handset, but I can hear them. ■ Verify that the handset cord is plugged into the HANDSET jack. If the handset cord is plugged into the HEADSET jack, the microphone will not work. 44 ADDITIONAL INFO