Uniden 410 English Owners Manual - Page 45
Troubleshooting, Filter Installation
View all Uniden 410 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 45 highlights
ADDITIONAL INFORMATION TROUBLESHOOTING (cont.) TELEPHONE (cont.) When a call comes in on line 2, my station's LINE 2 indicator does not light. ■ Check the FAX/PC switch. All stations switches should be set to PHONE when a PC or fax is not connected. I cannot operate the phone during a power failure. ■ Install four AA alkaline batteries (not included) into the bottom of the base to enable the telephone to operate up to 1 hour during a power failure. I hear a dial tone when I try to answer a call. ■ The caller has hung up before you answered the call. OR ■ If you have a private line, an attempt may have been made to transfer a call to your station from an uncommon line. FILTER INSTALLATION DSL service can interfere with communication between Executive Series telephones. If DSL service is present on Line 1, a filter (provided by the DSL provider) should be installed as indicated below. Installation sites at greater distances from the telephone company central office may also experience network communication problems. These problems include inability to make or receive intercom calls or inconsistent call transfers and paging. If you are experiencing these problems, a filter (part number 3001-01) needs to be installed. Contact the company from which you purchased the phone to obtain this filter. 45 ADDITIONAL INFO