Uniden 410 English Owners Manual - Page 17

PROGRAMMING AUTODIAL Each unit in the system can store up to 20 autodial numbers. Ten 16-digit numbers can be accessed with the autodial key and ten additional entries using the lower register key followed by the autodial key. Each autodial entry can have up to 16 digits and can have 14 characters for the name. Once a number has been stored in an autodial location, press the selected autodial location key to have the unit automatically dial the programmed number. AUTODIAL CARD Remove the autodial card. Write down the names and/or telephone numbers associated with the stored speed dial numbers and replace the autodial card and plastic cover. An extra autodial card is provided for your convenience. Home Car Bank Joe Client Direct Line Agency Sue Smith PROGRAMMING LOWER Autodial numbers can be programmed in two ways: PROGRAMMING A CALLER ID RECORD INTO AUTODIAL To enter a caller ID record from your directory into an autodial location: 1 . Press . SANDY LEE 123-456-7800 2 . Press the < or > soft keys to scroll through records. 3 . When the caller ID record you want to store into autodial appears in the display, press and hold the selected autodial key location. 4 . After you hear a beep: SAVE TO LOC 01 YES NO 5 . The telephone number of the caller ID record will appear in the display. Press "NEXT" to accept the number. (To edit the number, see page 19 "EDITING AUTODIAL ENTRIES.") NOTE: ■ Include the outside line digit if one is needed to dial. 6 . The caller ID name will now appear in the display. Press the soft key under "SAVE" to store the name and number. (To edit the name, see page 19 "EDITING AUTODIAL ENTRIES.") 7 . Press to exit. NOTE: ■ Only the first 14 characters of a Caller ID NAME will be transferred to the autodial location. 17