Uniden 410 English Owners Manual - Page 42

ADDITIONAL INFORMATION DISPLAYS (cont.) DISPLAYED MESSAGE STATUS ACTION NO DATA PAGING Nothing stored in this autodial Select another autodial location. location or store an autodial number. See pages 17-19, under "PROGRAMMING AUTODIAL." Sending a page. See page 37 to send a page. PERFORM SYSTEM UPDATE AT A DIFFERENT STATION Line 1 has been disconnected Perform a system update at and then reconnected, a another station. See page 40 station has been added to the under "PERFORMING A system, the AC power has SYSTEM UPDATE." been removed and then reconnected, a power failure occurred or a unit changed it's station ID. PLEASE CONNECT LINE1 Line 1 has been disconnected. Reconnect line 1. If display still appears after the line is reconnected, make sure line 1 is not in use when line 1 is reconnected. PRV RELEASED Station has released privacy. Privacy has been released on this call. PRV RESTORED Station has restored privacy. Privacy has been restored on this call. SCRATCH PAD The scratch pad button has been pressed. Enter the number you want to store and then press SCRATCH PAD again. See page 29. SET STATION Line 1 has been disconnected, Press the soft key under AC power was lost or this is "SAVE." See page 12 under initial setup. "ASSIGNING A STATION EXTENSION NUMBER." UNABLE TO CALL Can not intercom, page all or transfer. The intended station is busy or other stations may be using the intercom or page functions. Try again later. See "INTERCOM & PAGING OPERATION" on pages 35-37. ADDITIONAL INFO 42