ViewSonic CD4220 User Guide - Page 32
ADVANCED OPTION, ViewSonic
UPC - 766907278019
View all ViewSonic CD4220 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 32 highlights
ADVANCED OPTION INPUT RESOLUTION * : INPUT RGB2 only y Selects to decision of input signal about below timings, 1024x768, 1280x768 and 1360x768. y AUTO: Determines the resolution automatically. y 1024x768: Determines the resolution as 1024x768 y 1280x768: Determines the resolution as 1280x768 y 1360x768: Determines the resolution as 1360x768 y The setting you select becomes effective when POWER is turned OFF and ON again. BLACK LEVEL EXPANSION * : INPUT RGB1(HDMI INPUT MODE-HD), VIDEO, VIDEO only y Selects a level of black expansion from "OFF", "MIDDLE" and "HIGH." y In case of go under the black cut-off level, please adjust the "Black level" in moderation on OSD menu. GAMMA SELECTION y Selects a display gamma. y 2.2 y 2.4 y S gamma y Native SCAN MODE * : INPUT DVD/HD, VIDEO, VIDEO only y Changes the display area of the image. y OVERSCAN: Set to display area about 95% y UNDERSCAN: Set to display area about 100% SCAN CONVERSION * : INPUT DVD/HD, VIDEO, VIDEO only y Selects IP (Interlace to Progressive) converter function. y PROGRESSIVE: Enable the IP function, to convert interlace signal to progressive. Normally use this setting. y INTERLACE*: Disable the IP function. y *NOTE: This mode is better suited for motion pictures, but it increases chance of image retention. FILM MODE * : INPUT DVD/HD, VIDEO, VIDEO only y Selects Film mode function. y AUTO: Enable the Film mode function. This mode is better suited for movies, which is converted 24 Frames/sec source to DVD Video. We recommend to select "PROGRESSIVE" in "SCAN CONVERSION". y OFF: Disable the Film mode function. This mode is better suited for Broadcasting or VCR source. IR CONTROL y Selects the operation mode of the wireless remote controller when multiple CD4220 monitors are connected via RS-232C. y The item in this menu will become effective by pressing "SET" button on the selected item. y NORMAL: The monitor will be controlled normally by wireless remote controller. y PRIMARY: The first CD4220 monitor of those multi-connected via RS-232C is designated as PRIMARY. y SECONDARY: CD4220 monitors other than the first one multi-connected via RS-232C are designated as SECONDARY. y LOCK: Disable the monitor control by infrared wireless remote controller. y Keep pressing "DISPLAY" button during 5 sec or more, this setting will return to "NORMAL" ViewSonic CD4220 30