ViewSonic PJD6683ws PJD5126, PJD6223, PJD6253, PJD6553W, PJD5226, PJD5226W, PJ - Page 32

Switching input signal

Get ViewSonic PJD6683ws PDF manuals and user guides View all ViewSonic PJD6683ws manuals
Add to My Manuals
Save this manual to your list of manuals

Page 32 highlights

Switching input signal The projector can be connected to multiple devices at the same time. However, it can only display one full screen at a time. Be sure the Quick Auto Search function in the SOURCE menu is On if you want the projector to automatically search for the signals. You can also manually select the desired signal by pressing one of the source selection keys on the remote control, or cycle through the available input signals. 1. Press SOURCE on the projector or remote control. A source selection bar is displayed. 2. Press / until your desired signal is selected and press MODE/ENTER on the projector or Enter on the remote control. Once detected, the selected source information will be displayed on the screen for seconds. If there are multiple devices connected to the projector, repeat steps 1-2 to search for another signal. • The brightness level of the projected image will change accordingly when you switch between different input signals. Data (graphic) "PC" presentations using mostly static images are generally brighter than "Video" using mostly moving images (movies). • The input signal type effects the options available for the Color Mode. See "Selecting a picture mode" on page 32 for details. • Please see "Projector specifications" on page 64 for the native display resolution of this projector. For best display picture results, you should select and use an input signal which outputs at this resolution. Any other resolutions will be scaled by the projector depending upon the 'aspect ratio' setting, which may cause some image distortion or loss of picture clarity. See "Selecting the aspect ratio" on page 30 for details. PJD5126/PJD5226/PJD5226w D-Sub / Comp. 1 D-Sub / Comp. 2 Video S-Video PJD6223/PJD6253/PJD6353/ PJD6383/PJD6553w/ PJD6653w/PJD6683w D-Sub / Comp. 1 D-Sub / Comp. 2 HDMI Video S-Video Changing Color Space This function is only available for the PJD6223/PJD6253/PJD6353/PJD6383/PJD6553w/ PJD6653w/PJD6683w series. In the unlikely event that you connect the projector to a DVD player via the projector's HDMI input and the projected picture displays wrong colors, please change the color space to YUV. To do this: 1. Open the OSD menu and go to the SOURCE menu. 2. Press to highlight Color Space Conversion and press / to select a suitable color space. This function is only available when the HDMI-input port is in use. 27

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
27
Switching input signal
The projector can be connected to multiple devices at the same time. However, it can only
display one full screen at a time.
Be sure the
Quick Auto Search
function in the
SOURCE
menu is
On
if you want the
projector to automatically search for the signals.
You can also manually select the desired signal by
pressing one of the source selection keys on the
remote control, or cycle through the available input
signals.
1.
Press
SOURCE
on the projector or remote
control. A source selection bar is displayed.
2.
Press
/
until your desired signal is
selected and press
MODE/ENTER
on the
projector or
Enter
on the remote control.
Once detected, the selected source information
will be displayed on the screen for seconds. If
there are multiple devices connected to the
projector, repeat steps 1-2 to search for another
signal.
•
The brightness level of the projected image will
change accordingly when you switch between
different input signals. Data (graphic) "PC"
presentations using mostly static images are
generally brighter than "Video" using mostly
moving images (movies).
•
The input signal type effects the options available
for the Color Mode. See
"Selecting a picture
mode" on page 32
for details.
•
Please see
"Projector specifications" on page 64
for the native display resolution of this projector.
For best display picture results, you should select
and use an input signal which outputs at this
resolution. Any other resolutions will be scaled by
the projector depending upon the 'aspect ratio'
setting, which may cause some image distortion
or loss of picture clarity. See
"Selecting the aspect
ratio" on page 30
for details.
Changing Color Space
This function is only available for the PJD6223/PJD6253/PJD6353/PJD6383/PJD6553w/
PJD6653w/PJD6683w series.
In the unlikely event that you connect the projector to a DVD player via the projector’s
HDMI
input and the projected picture displays wrong colors, please change the color space
to
YUV
.
To do this:
1.
Open the OSD menu and go to the
SOURCE
menu.
2.
Press
to highlight
Color Space Conversion
and press
/
to select a suitable
color space.
This function is only available when the HDMI-input port is in use.
D-Sub / Comp. 1
Video
S-Video
D-Sub / Comp. 2
PJD5126/PJD5226/PJD5226w
PJD6223/PJD6253/PJD6353/
PJD6383/PJD6553w/
PJD6653w/PJD6683w
D-Sub / Comp. 1
Video
S-Video
D-Sub / Comp. 2
HDMI