Viking VUWC Installation Instructions - Page 5
Hinge-by-Hinge Installation Mullion
View all Viking VUWC manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 5 highlights
Installation Side-by-Side Installation OTHER SITE REQUIREMENTS Side-by-Side Installation Units must operate from separate, properly grounded electrical receptacles placed according to each unit's electrical specifications requirements. Cutout width for a side-by-side installation is the total of the widths listed under Cutout Dimensions in each unit's Installation Guide. Each door can be opened individually (one at a time) without interference. Hinge-by-Hinge Installation (Mullion) When installing two units hinge-by-hinge, 13/16" (22 mm) is required for integrated models. Additional space may be needed for any knobs, pulls or handles installed. 13/16" (22 mm) Stainless steel models which include the standard stainless handle will require 4-9/16" (116 mm) to allow both doors to open to 90° at the same time. However, to ensure unobstructed door swing (opening both doors at the same time), 1/4" (6.4 mm) of space needs to be maintained between the units. 1/ " (6 mm) 4 4 - 9/16" (116 mm) 5