Viking VUWC Installation Instructions - Page 9
Operating Instructions
View all Viking VUWC manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
Operating Instructions First Use Initial startup requires no adjustments. When plugged in, the unit will begin operating under the factory default settings. If the unit was turned off during installation, simply press and the unit will immediately switch on. To turn the unit off, press . NOTICE: Temperature displayed reflects actual temperature inside unit. If the temperature displayed is different than selected, the unit is progressing towards the selected temperature. Time to reach set point varies based upon ambient temperature, temperature of product loaded, door openings, etc. Viking recommends allowing the unit to reach set points before loading. Control Operation Hidden Button CONTROL FUNCTION GUIDE FUNCTION COMMAND NOTES ON/OFF Adjust Temperature Toggle between ºF / ºC Leave interior light on Hide Display Adjust light color Enable Sabbath Mode Press and release Unit will immediately turn On or OFF Press or and release When the display is flashing, press or to adjust the set point temperature. Note: temperature displayed is the actual temperature inside unit Hold and for 5 seconds The display will change units Press and release to leave interior light on for 12 hours; press again to deactivate Hold hidden button and press While holding press and release to scroll through lighting options Press and hold for 5 seconds and release After 12 hours, factory default is restored; light will turn on when door is open Display will turn off when door is closed. Unit will continue to operate. Repeat command to turn on display Option 00 01 02 Open Door White Blue White Closed Door White Blue Blue Light will be set at full intensity when door is open, and 50% intensity when door is closed. The oF / oC symbol will flash briefly after 5 seconds. Interior light and display will go dark and remain so until user resets mode - unit continues to operate Disable Sabbath Mode Press and release Showroom Mode Hold and for 5 seconds DOOR ALERT NOTIFICATION When the door is left open for more than 5 minutes: • A tone will sound for several seconds every minute • will appear in display • Closed door to silence alert and reset Display and interior light return to normal operation The ºF / ºC symbol will flash. Display will be lit and interior light will function. Unit will not cool. Repeat command to return to normal operation This unit is Star-K certified. See www.star-k.org for more details. 9