Vtech Expandable Cordless Phone System with BLUETOOTH® Wireless Technology - Page 82

Appendix Expand your telephone system The handset provided with your telephone system is pre-registered as HANDSET. Additional handsets registered to the telephone system are assigned in sequential order. If you register another new handset to your telephone system, the new registered handset is assigned HANDSET 2. This telephone system accommodates up to 12 handsets. Add and register a handset (optional) You can add new handsets (LS6204, purchased separately) to your telephone system, but each handset must be registered with the telephone base before use. When first purchased, each expansion handset shows NOT REGISTERED. You may need to charge the handset before registering to the telephone base. For more details on battery charging, see the table on page 5. To register a handset: 1. Place the unregistered handset in the telephone base. If To register, press HOLD on BASE for 4 sec does not appear on the handset screen after a few seconds, remove the handset and place it in the telephone base again. 2. On the telephone base, press and hold HOLD for about four seconds until the telephone base displays Registering handset. The handset shows Please wait... and it takes up to 60 seconds to complete the registration. The handset shows HANDSET X Registered (X represents the handset number assigned) and you hear a beep when the registration completes. • If the registration fails, the handset shows NOT REGISTERED. To reset the handset, remove the handset from the telephone base and place it back in. Try the registration process again. • You cannot register a handset if any other system handset is in use. 78