Weider Club C 725 English Manual - Page 26

Wrap the Rear Cable 94 under a Small Pulley

Get Weider Club C 725 PDF manuals and user guides View all Weider Club C 725 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 26 highlights

51. Wrap the Rear Cable (94) under a Small Pulley 51 (74). Attach the Small Pulley, a Small Cable Trap (93), and two Half Pulley Guards (91) at the holes closest to either end of the two Pulley Plates (92) with an M10 x 52mm Button Bolt (135) and an M10 Nylon Locknut (116). Make sure that the Small Cable Trap and the Half Pulley Guards are oriented as shown. 116 94 74 91 93 91 135 92 52. Attach the Rear Cable (94) inside the Weight 52 Carriage Frame (18) with an M10 x 65mm Button Bolt (66), two M10 Washers (83), and an M10 Nylon Locknut (116). 116 83 18 83 66 94 53. Identify the Low Cable (80). Route the threaded 53 end of the Low Cable through the Foot Plate (15) and the Center Upright (13). Wrap the Low Cable (80) under a 115mm Pulley (146). Attach the 115mm Pulley inside the Center Upright (13) with an M10 x 65mm Button Bolt (66), two M10 Washers (83), two 12.5mm Spacers (138), and an M10 Nylon Locknut (116). 116 83 138 146 13 15 138 83 80 66 26

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
26
51. Wrap the Rear Cable (94) under a Small Pulley
(74). Attach the Small Pulley, a Small Cable Trap
(93), and two Half Pulley Guards (91) at the holes
closest to either end of the two Pulley Plates (92)
with an M10 x 52mm Button Bolt (135) and an
M10 Nylon Locknut (116).
Make sure that the
Small Cable Trap and the Half Pulley Guards
are oriented as shown.
52. Attach the Rear Cable (94) inside the Weight
Carriage Frame (18) with an M10 x 65mm Button
Bolt (66), two M10 Washers (83), and an M10
Nylon Locknut (116).
52
53.
Identify the Low Cable (80).
Route the threaded
end of the Low Cable through the Foot Plate (15)
and the Center Upright (13).
Wrap the Low Cable (80) under a 115mm Pulley
(146). Attach the 115mm Pulley inside the Center
Upright (13) with an M10 x 65mm Button Bolt
(66), two M10 Washers (83), two 12.5mm
Spacers (138), and an M10 Nylon Locknut (116).
53
18
66
116
83
94
83
80
15
66
138
83
13
91
91
92
74
93
135
116
94
146
116
83
51
138