Weider Club C 725 English Manual - Page 32

ATTACHING THE ACCESSORIES TO THE HIGH PULLEY STATION To use the high pulley station, first place the desired weights on the Weight Carriage (see page 31). Next, attach the Lat Bar (59) to the High Cable (81) with a 81 Cable Clip (63). For some exercises, the Chain (62) should be attached between the Lat Bar and the 63 Cable with two Cable Clips. Adjust the length of the Chain between the Lat Bar and the Cable so that 62 the Lat Bar is in the correct starting position for 59 the exercise to be performed. See the inset drawing. The Pulley Handles (57) and the Curl Bar (58) can be attached to the High Cable 63 (81) in the same way. You can store unused accessories on the hooks on the Rear Uprights (12). Hook 12 WARNING: Always disconnect the Lat Bar (59) and the Curl Bar (58) when per- forming an exercise that does not require using the Lat Bar or the Curl Bar. 57 58 ATTACHING THE ACCESSORIES TO THE LOW PULLEY STATION To use the low pulley station, first place the desired weights on the Weight Carriage (see page 31). Next, attach the Curl Bar (58) to the Low Cable (80) with a Cable Clip (63). For some exercises, the Chain (62) should be attached between the Lat Bar and the Cable with two Cable Clips. Adjust the length of the Chain between the Curl Bar and the Cable so that the Curl Bar is in the correct starting position for the exercise to be performed. See the inset drawing. The Ankle Strap (64), a Pulley Handle (57), and the Row Bar (65) can be attached to the Low Cable (80) in the same way. You can store unused accessories on the hooks on the Rear Uprights (12). Hook 12 80 63 58 64 62 63 65 57 57 32