Weider Pro 9645 English Manual - Page 10
Assist
View all Weider Pro 9645 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
15. See the inset drawing. Attach the Military Press Arm (84) to the Pivot Arm (101) with 15 two 5/16" x 2 1/4" Bolts (33) and two 5/16" Nylon Locknuts (3). Press two 1 1/2" Square Inner Caps (32) into the Military Press Arm (84). Press two 1" Round Inner Caps (49) into the Military Press 21 Arm. Slide two 5" Plastic Handgrips (83) onto the Military Press Arm. Attach the Pivot Arm (101) to the Assist Upright (74) with a 3/8" x 3 1/4" Bolt (67) and a 3/8" Nylon Locknut (21). 74/ 32 49 32 84 101 83 67 56 33 16. Press two 1" x 2" Inner Caps (107) into the Assist Arm (105). Attach the Assist Arm (105) to the Leg Press Upright (56) with a 3/8" x 6" Bolt (106), two 3/8" Flat Washers (9), and a 3/8" Nylon Locknut (21). See the inset drawing. The Assist Arm must be attached to the lowest hole in the Leg Press Upright (56). The Assist Arm must also be below the welded bracket on the Assist Upright (74). 101 84 3 16 Bracket 105 74 56 74 105 56 106 8 a 107 9 „-„ 21 10