Weider Pro 9645 English Manual - Page 15
Locknut 3.
View all Weider Pro 9645 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
31. Attach the end of the Low Cable (23) to the 31 Long "U"-Bracket (57) with a 1/4" Nylon Locknut (2) and a 1/4" Flat Washer (10). Do not completely tighten the Nylon Locknut. It should be threaded onto the end of the Cable so only a couple of threads are showing above the Nylon Locknut, as shown in the inset drawing. 23 32. Attach the High Cable (58) to a Small "U"Bracket (71) with a 1/4" Nylon Locknut (2) and 32 a 1/4" Flat Washer (10). Do not completely tighten the Nylon Locknut. It should be threaded onto the end of the Cable only a couple of turns, as shown in the inset drawing. Attach the Small "U"-Bracket (71) to the Short Weight Tube (108) with a 5/16" x 1 3/4" Bolt (24) and a 5/16" Nylon Locknut (3). 2 2 10 -10 57 58 cb 71 108 0 57 23 24 z 33. Locate the Military Press Cable (72). Attach the Military Press Cable to the other Small "U"-Bracket (71) with a 1/4" Nylon Locknut (2) and a 1/4" Flat Washer (10). Do not completely tighten the Nylon Locknut. It should be threaded onto the end of the Cable only a couple of turns, as shown in the inset drawing. Attach the Small "U"-Bracket (71) to the Long Weight Tube (63) with a 5/16" x 1 3/4" Bolt (24) and a 5/16" Nylon Locknut (3). 58 71 10 2 33 3 _ca. 63 72 71 10 2 15 72 71 24 10 2