Weider Weevsy3426 Uk Manual - Page 16

17. Apply grease to an M8 x 19mm Shoulder Bolt (65). Attach the Arm Cable (54) to the indicated 17 Cable Pivot (39) with the Shoulder Bolt and an M8 Locknut (58). Make sure that the Cable can pivot freely around the Shoulder Bolt. Grease 65 54 39 58 18. Identify the High Cable (55). Route the High Cable up through the Top Frame (4) and over a 18 90mm Pulley (48). Attach the Pulley inside of the Top Frame with an M10 x 80mm Bolt (71), two M10 Washers (57), two 19mm Spacers (33), and an M10 Locknut (56). 57 56 33 55 4 48 33 57 71 19. Route the High Cable (55) over a 90mm Thin Pulley (47) and down through the Top Frame 19 (4). Attach the Thin Pulley inside of the Top Frame with an M10 x 80mm Bolt (71), an M10 Washer (57), and a 19mm Spacer (33). Make sure that the Thin Pulley does not fall out of the Top Frame while you complete steps 20 and 21. 47 55 4 33 57 71 16