Weider Weevsy3426 Uk Manual - Page 18

23. Thread an M12 Nut (86) all the way onto the High Cable (55). Place a Large Washer (87) on 23 top of the Weight Tube (24). 55 Tighten the High Cable (55) into the Weight 86 Tube (24) until all the slack is removed from the cables. Tighten the M12 Nut (86) against the 87 Large Washer (87). 24 24. Identify the Low Cable (53). Route the Low Cable through the Leg Lever (8) and the Front 24 Leg (7). Attach a 90mm Pulley (48) inside the Leg Lever (8), over the Low Cable (53), with an M10 x 75mm Bolt (85), two M10 Washers (57), two 16mm Spacers (52), and an M10 Locknut (56). 8 56 52 57 53 48 7 57 52 85 25. Attach a 90mm Pulley (48) inside the Front Leg (7), over the Low Cable (53), with an M10 x 80mm Bolt (71), two M10 Washers (57), two 19mm Spacers (33), and an M10 Locknut (56). 25 57 56 33 48 7 53 57 33 71 18