Weider Weevsy3426 Uk Manual - Page 17
Attach the Thin Pulley inside the Top Frame
View all Weider Weevsy3426 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 17 highlights
20. Wrap the High Cable (55) under a 90mm Pulley (48). Attach the Pulley and two Half Guards (43) 20 at the upper hole in the Adjustable U-bracket (45) with an M10 x 45mm Bolt (81) and an M10 Locknut (56). Make sure that the Half Guards are on the outside of the Adjustable U- bracket. 21. Route the High Cable (55) up through the Top Frame (4) and over a 90mm Thin Pulley (47). 21 Attach the Thin Pulley inside the Top Frame with the M10 x 80mm Bolt (71) used in step 19, a 19mm Spacer (33), an M10 Washer (57), and an M10 Locknut (56). 55 56 43 48 43 81 45 55 56 33 47 4 57 71 22. Route the High Cable (55) over a 90mm Pulley (48) and down through the Top Frame (4). 22 Attach the Pulley inside the Top Frame with an M10 x 80mm Bolt (71), two M10 Washers (57), two 19mm Spacers (33), and an M10 Locknut (56). 56 33 57 4 48 55 33 57 71 17