Weider Weevsy3426 Uk Manual - Page 22

IMPORTANT: If the cables are not properly installed, they may be damaged when heavy weight is

Get Weider Weevsy3426 PDF manuals and user guides View all Weider Weevsy3426 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 22 highlights

34. Orient the Curl Pad (14) so that the holes in the back are closer to the lower edge. Attach the 34 Curl Pad to the Curl Post (13) with two M6 x 16mm Screws (62). 14 13 62 35. Make sure that all parts have been properly tightened. The use of the remaining parts will be explained in ADJUSTMENT, beginning on page 23. Before using the weight system, pull each cable a few times to make sure that the cables move smoothly around the pulleys. If one of the cables does not move smoothly, find and correct the problem. IMPORTANT: If the cables are not properly installed, they may be damaged when heavy weight is used. See the CABLE DIAGRAMS on page 26 of this manual for proper cable routing. If there is any slack in the cables, you will need to remove the slack by tightening the cables. See MAINTENANCE on page 27. 22

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
22
34. Orient the Curl Pad (14) so that the holes in the
back are closer to the lower edge. Attach the
Curl Pad to the Curl Post (13) with two M6 x
16mm Screws (62).
35. Make sure that all parts have been properly tightened. The use of the remaining parts will be explained in
ADJUSTMENT, beginning on page 23.
Before using the weight system, pull each cable a few times to make sure that the cables move smoothly
around the pulleys. If one of the cables does not move smoothly, find and correct the problem.
IMPORTANT: If the cables are not properly installed, they may be damaged when heavy weight is
used. See the CABLE DIAGRAMS on page 26 of this manual for proper cable routing. If there is any
slack in the cables, you will need to remove the slack by tightening the cables. See MAINTENANCE
on page 27.
14
13
62
34