Western Digital WDBVHT0080JCH WD SmartWare User Manual - Page 33

WD SMARTWARE SOFTWARE USER MANUAL d. If the selected device has more than one drive partition or network share, use the selector box under the device icon to select the one that you want to use: 2. Click the Backup tab to display the Backup screen (see Figure 2 on page 9). 3. On the Backup screen: IF you want to back up . . . on the internal hard drive, THEN . . . All of the categories of files Selected categories of files Proceed to step 4. Skip to step 5. All of the files and folders Selected files or folders Skip to step 6 on page 30. Skip to step 7 on page 31. 4. To back up all of the categories of files and on the internal hard drive: a. Verify that the backup mode is category and that Ready to perform category backup appears at the upper-left corner of the Backup screen. If the backup mode is file and Ready to perform file backup appears there, then click the Switch to Category Backup button and OK at the Switching Backup Plan prompt. b. Click Advanced View to open the backup by categories selection box and verify that the check boxes for all six categories are selected: As required, select any cleared check boxes and then click Apply Changes to create a custom backup plan and refresh the content gauge for your external device. c. Click Start Backup to begin backing up all categories of files on the internal hard drive and skip to step 8 on page 31. 5. To backup selected categories of files: a. Verify that the backup mode is category and that Ready to perform category backup appears at the upper-left corner of the Backup screen. BACKING UP YOUR COMPUTER FILES - 29