Xerox 2218 User Guide - Page 58

Getting Started 01_UG.book Page 30 Wednesday, March 7, 2007 3:00 PM Installing Xerox Drivers in Microsoft Windows 98 or Windows Millennium using the USB port 1 ¾ Plug the USB cable into the FaxCentre 2218 and connect it to your Personal Computer (PC). Start your PC and switch on the FaxCentre 2218. 2 ¾ Insert the Xerox Drivers CD into the CD-ROM drive. 3 ¾ The Add New Hardware Wizard will display. Click [Next]. 4 ¾ Confirm that the radio button Search for the best driver for your device is chosen. Click [Next]. i In Windows Millennium (Me) the add Hardware Wizard will search and find the scan driver. Click [Finish] when this process is complete. Windows Me will then display the Add New Hardware Wizard for the print driver, click [Next]. Click [Finish] when this process is complete. The drivers are installed and you can skip to step 9. ii In Windows 98 you must specify the location. Browse to the CD-ROM drive and the "Usb" folder on the CD and click [OK]. Click [Next] when prompted then [Finish]. The USB composite driver is then loaded. 5 ¾ The Add New Hardware Wizard will display. Click [Next] to install the USB hardware driver for the FaxCentre 2218. 6 ¾ You must specify the location. Browse to the CD-ROM drive and the "Usb" folder on the CD and click [OK]. Click [Next] when prompted then click [Finish]. The USB hardware driver for the FaxCentre 2218 is now loaded. 7 ¾ The Add New Hardware Wizard will display. Click [Next] to install the Scan driver for the FaxCentre 2218. Page 2-30 Xerox FaxCentre 2218 User Guide