Xerox M15I WorkCentre M15/M15i User Guide - Page 120

Machine Administration System Setup Options OPTION Receive Mode l Use to set the receive mode, depending on how the machine is connected to the telephone line. Secure Receive l Use to store all received faxes in the machine's memory until printed by a user. Prefix Dial Fax No. l Use to set a prefix dial number. Ringer Volume l Use to set the ringer volume level. Alarm Sound l An alarm tone will sound when an error occurs or a fax communication ends. Key Sound l A key tone sounds each time any key is pressed. SETTINGS TEL FAX TEL/FAX ANS/FAX ON OFF PRINT Up to 5 digits 10 Levels ON OFF DESCRIPTION Use to operate in manual mode. When a call is received pick up the external phone handset or press [Manual Dial]. If a fax tone can be heard, press [Start] and replace the handset. The machine answers the incoming call and immediately switches to fax receive mode. The machine answers the incoming call. If a fax tone is not detected, the machine sounds a ringing tone to indicate a voice phone call. To answer the call, press [Start] on the control panel, then lift the handset. If the external phone is not lifted while the ringing tone is sounding, the machine will switch to automatic fax reception mode. Use if attaching an answering machine to the WorkCentre M15/M15i. If the machine detects a fax tone, it switches to fax mode automatically. Use to receive all faxes into the machine's memory. When enabling Secure Receive a secure passcode can be entered to restrict access to the faxes received. If a passcode has been setup, when PRINT is selected the passcode is required. The number entered will be added to the beginning of each fax sent. To switch the ringer off, set to the left. Set to the right for a loud ring tone. Set to ON to enable an alarm sound. ON OFF Set to ON to enable a key sound. Page 9-12 Xerox WorkCentre M15/M15i User Guide