Xerox M15I WorkCentre M15/M15i User Guide - Page 163

Printing Problems Solution Chart, The IEEE-1284 parallel - drivers windows 7

Page 163 highlights

Troubleshooting Printing Problems Solution Chart PROBLEM The product does not print Half of the page is blank PROBABLE CAUSE SUGGESTED SOLUTION The IEEE-1284 parallel Check the cable connection. cable or USB cable is not connected properly. The IEEE-1284 parallel cable or USB cable is defective. Check the cable with a computer and printer that work. If printing is still not possible, replace the cable. The port setting is incorrect. Check the printer settings in the Windows Control Panel to ensure that the print job is being sent to the correct port. (For Example: LPT1.) The toner and drum cartridges are not installed properly. Check that the toner and drum cartridges are installed properly. The printer driver may not be installed properly. Reinstall the software. The parallel port cable specifications may not be correct. Use an IEEE-1284 compliant parallel port cable. The page layout is too complex. Reduce the resolution setting from 600 dpi to 300 dpi. Install more RAM in the computer. The page orientation may be incorrect. Change the page orientation in the printer setup dialog. Xerox WorkCentre M15/M15i User Guide Page 11-17

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
  • 171
  • 172
  • 173
  • 174
  • 175
  • 176
  • 177
  • 178
  • 179
  • 180
  • 181

Xerox WorkCentre M15/M15i User Guide
Page 11-17
Troubleshooting
Printing Problems Solution Chart
PROBLEM
PROBABLE CAUSE
SUGGESTED SOLUTION
The product does not print
The IEEE-1284 parallel
cable or USB cable is
not connected properly.
Check the cable connection.
The IEEE-1284 parallel
cable or USB cable is
defective.
Check the cable with a computer and printer
that work. If printing is still not possible,
replace the cable.
The port setting is
incorrect.
Check the printer settings in the Windows
Control Panel to ensure that the print job is
being sent to the correct port. (For Example:
LPT1.)
The toner and drum
cartridges are not
installed properly.
Check that the toner and drum cartridges
are installed properly.
The printer driver may
not be installed
properly.
Reinstall the software.
The parallel port cable
specifications may not
be correct.
Use an IEEE-1284 compliant parallel port
cable.
Half of the page is blank
The page layout is too
complex.
Reduce the resolution setting from 600 dpi
to 300 dpi. Install more RAM in the
computer.
The page orientation
may be incorrect.
Change the page orientation in the printer
setup dialog.