Xerox M15I WorkCentre M15/M15i User Guide - Page 153
Fuser Area, WARNING, The fuser area is hot. Take care when removing paper from the machine. - fuser unit
UPC - 095205024050
View all Xerox M15I manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 153 highlights
Troubleshooting Fuser Area If jammed in the fuser area, 'PAPER JAM 1' appears in the display. WARNING: The fuser area is hot. Take care when removing paper from the machine. Ø Press the release latch to open the side cover. Ø Pull down on the fuser lever as shown below. This will release pressure on the paper. Ø If paper is not seen in this area, skip to the Exit Area. CAUTION: Do not pull paper up through the fusing unit. Unfused toner may adhere in the area, resulting in smudged copies. Ø Remove the jammed paper, in the direction shown. Xerox WorkCentre M15/M15i User Guide Page 11-7
Xerox WorkCentre M15/M15i User Guide
Page 11-7
Troubleshooting
Fuser Area
If jammed in the fuser area, ±PAPER JAM 1° appears in the display.
WARNING:
The fuser area is hot. Take care when removing paper from the machine.
CAUTION:
Do not pull paper up through the fusing unit. Unfused toner may adhere in
the area, resulting in smudged copies.
±
Press the release latch to open
the side cover.
±
Pull down on the fuser lever as
shown below. This will release
pressure on the paper.
±
If paper is not seen in this area,
skip to the Exit Area.
±
Remove the jammed paper, in
the direction shown.