Xerox M15I WorkCentre M15/M15i User Guide - Page 160
Group Not Available, Function Full
UPC - 095205024050
View all Xerox M15I manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 160 highlights
Troubleshooting DISPLAY Paper Jam 0 Paper Jam 1 Paper Jam 2 Toner Empty Toner Low Retry Redial Comm. Error Group Not Available Line Error Function Full No Answer MEANING SOLUTION Paper has jammed in the paper feeding area. Clear the jam. Refer to "Paper Jams" on page 11-5. Paper has jammed in the fuser area. Clear the jam. Refer to "Paper Jams" on page 11-5. Paper has jammed in the paper exit area. Clear the jam.Refer to page "Paper Jams" on page 11-5. The toner cartridge has run out. The machine stops. Replace with a new toner cartridge. Refer to "Toner Cartridge" on page 105. The toner is almost empty. Take out the toner cartridge and gently shake it. By doing this printing operations can be temporarily resumed. The machine is waiting for the programmed interval to automatically redial. Press [Start] to immediately redial, or [Stop] to cancel the redial operation. A problem with the fax communications has occurred. Try resending the fax. A Group location has been selected where only a single location number can be used, such as when adding locations for a multi-dial operation. Try again, check the location for a Group. The machine cannot connect with the remote machine, or has lost contact because of a problem on the phone line. Try resending the fax. If failure persists, wait an hour or more for the line to clear then try again. The memory has become full. Either delete unnecessary documents, or retransmit after more memory becomes available. The transmission can also be split into more than one operation if it is a large job. The remote machine was not Try resending the fax. Ensure the answered after all the redial attempts. remote machine is functioning correctly. Page 11-14 Xerox WorkCentre M15/M15i User Guide