Xerox M15I WorkCentre M15/M15i User Guide - Page 159
LCD Error Messages - no developer cartridge
UPC - 095205024050
View all Xerox M15I manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 159 highlights
Troubleshooting LCD Error Messages If an abnormal condition arises in the machine or an incorrect operation is performed, a message indicating the nature of the error is displayed. If this happens, take the corrective action listed in the following table. DISPLAY MEANING SOLUTION Bypass Jam The machine detects non feeding from Load paper in the bypass tray. the bypass tray. Document Jam The loaded document has jammed in Clear the document jam. Refer to the ADF. "Document Jams" on page 11-3 Door Open The side cover is not securely latched. Close the side cover until it locks into place. Drum Warning The drum cartridge is near the end of life. Ensure a replacement cartridge is in stock. Replace the Drum cartridge when copy/print quality is degraded. This may show up as dark marks on the edge of the page. Refer to "Drum Cartridge" on page 10-9. Duplex Jam Paper has jammed in the middle of 2- Clear the jam. Refer to "Duplex Jam" sided printing. on page 11-11. Fuser Error There is a problem in the fuser unit. Unplug the power cord and plug it back in. If the problem still persists, please call for service. LSU Error A problem has occurred in the LSU (Laser Scanning Unit). Unplug the power cord and plug it back in. If the problem still persists, please call for service. Overheat The printer has overheated. The machine will automatically return to standby mode when it cools down to the normal operating temperature. If the problem persists, call for service. No Developer Cartridge The toner cartridge is not installed. Install the toner cartridge. Refer to "Toner Cartridge" on page 10-5. No Paper The recording paper in the paper cassette has run out. Load the recording paper in the paper cassette. Xerox WorkCentre M15/M15i User Guide Page 11-13