Xerox M15I WorkCentre M15/M15i User Guide - Page 67
Using the Bypass Tray, PAPER TYPE, MAXIMUM STACKING HEIGHT, Plain/Bond/Colored and, Pre-printed Paper
UPC - 095205024050
View all Xerox M15I manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 67 highlights
Paper and Other Media Using the Bypass Tray The bypass tray is located on the right side of the product. It can be closed when not in use, making the product more compact. Use the Bypass Tray to print transparencies, labels, envelopes or postcards in addition to making quick runs of paper types or sizes that are not currently loaded in the paper cassette. Acceptable print media is plain paper with sizes ranging from 98 x 148 mm (3.86 x 5.83 inch), to Legal size (216 x 356 mm / 8.5 x 14 inch) and weighing between 60 g/m2 and 160 g/m2 (16 lb and 43 lb). i When feeding media through the Bypass Tray the Paper Size option in System Data Settings must be set to the correct size. If feeding media smaller than A4/Letter, the setting can remain set at A4, Letter or Legal size. Refer to "System Data Settings" on page 9-3 for further information. When copying onto a paper size smaller than A4/Letter, the printed image may be offset and not reproduce correctly, even when Auto Fit is selected. The following table summarizes the print media allowed the maximum stacking height for each paper type. PAPER TYPE MAXIMUM STACKING HEIGHT Plain/Bond/Colored and 100 sheets or 9 mm (0.35 inch) Pre-printed Paper Envelope 10 envelopes or 9 mm (035 inch) Transparency 30 sheets or 9 mm (0.35 inch) Label 10 sheets or 9 mm (0.35 inch) Cardstock 10 sheets or 9 mm (0.35 inch) i The height is measured with the stack of sheets laid, without being touched by hands, on a flat surface. Xerox WorkCentre M15/M15i User Guide Page 5-5