Yamaha CL3 Cl Stagemix V3.0 User Guide - Page 17

Dca Faders

Get Yamaha CL3 PDF manuals and user guides View all Yamaha CL3 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 17 highlights

Yamaha Commercial Audio CL StageMix V3.0 User Guide If the Pan Link function is active for the currently active Stereo Mix Bus, a link icon will appear below the Pan slider. When Pan Link is active, adjusting a channel's Pan slider will affect the Pan parameter for that channel to the Master Stereo Bus and all other linked Stereo Mix Busses. Note: Pan Link mode for each Stereo Mix Bus can only be activated in the console, not from StageMix. To exit "SENDS ON FADERS" mode, press the [SENDS ON FADERS] button in the left column. 4.10 DCA FADERS Press the [DCA 1-8] or [DCA 9-16] button to access the console's 16 DCAs. A green LED will appear next to each DCA fader when it is set to exactly 0dB. DCA faders can be quickly set to exactly 0dB by double-tapping on the fader if the relevant Preference is On in the Setup screen (refer to 8.8). Press the [DCA 1-8] or [DCA 9-16] button again to exit the DCA fader bank and return to the previously selected bank. Alternatively, press any bank in the "Navigation/Meter Bridge" to directly access that fader bank. Page 17

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
Yamaha Commercial Audio
CL StageMix V3.0 User Guide
If the Pan Link function is active for the currently active Stereo Mix Bus,
a link icon will appear below the Pan slider.
When Pan Link is active,
adjusting a channel’s Pan slider will affect the Pan parameter for that
channel to the Master Stereo Bus and all other linked Stereo Mix
Busses.
Note: Pan Link mode for each Stereo Mix Bus can only be activated in
the console, not from StageMix.
To exit “SENDS ON FADERS” mode, press the [SENDS ON FADERS] button
in the left column.
4.10
DCA FADERS
Press the [DCA 1-8] or [DCA 9-16] button to access the console’s 16 DCAs.
A
green LED will appear next to each DCA fader when it is set to exactly 0dB.
DCA faders can be quickly set to exactly 0dB by double-tapping on the fader if
the relevant Preference is On in the Setup screen (refer to 8.8).
Press the [DCA 1-8] or [DCA 9-16] button again to exit the DCA fader bank
and return to the previously selected bank.
Alternatively, press any bank in
the “Navigation/Meter Bridge” to directly access that fader bank.
Page 17