Yamaha CVP-509 Owner's Manual - Page 102
Connecting a Microphone or Guitar, Set the [MIC. LINE] switch to MIC.
View all Yamaha CVP-509 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 102 highlights
Connecting a Microphone or Guitar CVP-509 CVP-505 CVP-503 CVP-501 By connecting a microphone or guitar to the [MIC./LINE IN] jack (standard 1/4" phone jack), you can enjoy singing along with your own performance or playing guitar along with Song playback. The instrument outputs your vocals or guitar sounds through the built-in speakers. The following instructions show how to connect a microphone. Please note that when connecting a guitar or other devices of high output level, make sure to set the [MIC. LINE] switch to "LINE." 1 Set the [INPUT VOLUME] knob to the minimum position. NOTE Make sure you have a conventional dynamic microphone. NOTE Always set the INPUT VOLUME to minimum when nothing is connected to the [MIC./LINE IN] jack. Since the [MIC./LINE IN] jack is highly sensitive, it may pick up and produce noise even when nothing is connected. 2 Connect the microphone to the [MIC./LINE IN] jack. Connections - Using Your Instrument with Other Devices - 10 3 Set the [MIC. LINE] switch to "MIC." 4 (For microphones having a power source, turn on the power first.) Adjust the [INPUT VOLUME] knob while singing into the microphone. Adjust the control while checking the SIGNAL and OVER lamps. The SIGNAL lamp lights to indicate that an audio signal is being received. Make sure to adjust the INPUT VOLUME so that this lamp is light. The OVER lamp lights when the input level is too high. Make sure to adjust the INPUT VOLUME so that this lamp does not light. Disconnecting the microphone 1. Set the [INPUT VOLUME] knob to the minimum position. 2. Disconnect the microphone from the [MIC./LINE IN] jack. 102 CVP-509/505/503/501 Owner's Manual NOTE Set the [INPUT VOLUME] knob to the minimum position before turning off the power.