Yamaha CVP-601 Reference Manual - Page 14

 EFFECT/EQ Page 1 REVERB DEPTH/CHORUS DEPTH/DSP DEPTH/VIB ROTOR [1]/ [2] REVERB DEPTH Adjusts the reverb depth. [3]/ [4] CHORUS DEPTH Adjusts the chorus depth. [5] DSP ON/OFF Determines whether the DSP is on or off. [6] DSP DEPTH Adjusts the DSP depth. If you want to re-select the DSP type, you can do so in the "2 DSP" menu explained below. 2 [7] VIBE ROTOR This will be displayed only if VIBE VIBRATE is selected for the DSP Type parameter explained below. Determines whether VIBE VIBRATE should be set to on or off when selecting the Voice. Voices - Playing the Keyboard - 2 DSP [1] - [4] [5] - [8] DSP TYPE VARIATION [5] ON/OFF PARAMETER [6] - VALUE [8] Selects the DSP effect category and type. Select a type after selecting a category. A Variation parameter is provided for each DSP type. Turning this on or off (in ON/OFF below), lets you instantly and significantly change the sound of the DSP effect. Here, you can edit the VARIATION on/ off status and variation's parameter value setting. Determines whether the VARIATION is on or off. If you select VARIATION ON here, a variation of the DSP effect is assigned to the Voice. The variation parameter value can be adjusted in the VALUE menu explained below. If you select VARIATION OFF, standard variation of DSP is assigned. Displays the variation parameter. (This differs depending on the effect type and cannot be changed.) Adjusts the value of the DSP variation parameter. 3 EQ Determines the Frequency and Gain of the Low and High EQ bands. For information about EQ, refer to page 76.  HARMONY Page Harmony sets the Right 1 and 2 parts together. Select the Right 1 part in the Main display, before you set it. This has the same settings as the display of "Selecting the Harmony/Echo type" page 6 in step 3. 14 CVP-601 Reference Manual