Yamaha HD-200 HD-200 Owners Manual - Page 27
Troubleshooting, Problem, Cause, Solution
View all Yamaha HD-200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 27 highlights
English Troubleshooting If you encounter any problems, first check the items listed below. If the solution provided below does not solve the problem, or you are experiencing a problem other than those mentioned in the list, turn the power OFF, disconnect the AC power adaptor and contact the dealer from whom you purchased the instrument to have the instrument repaired. Problem A "pop" like noise occurs when the power is turned ON. A scratching noise or "pop" occasionally occurs. Noise occurs from the radio or TV, etc. The lamps for the panel buttons are flashing. The speaker produces no sound even though the keyboard is being played. The volume of lower notes is too low. The sound is distorted. Data in the memory has been lost. The LCD display is hard to read. The sound is distorted when playing chords. Cause Electrical current is flowing through the main amplifier. Such a noise may occur when turning on/off the power of a household appliance such as a refrigerator or washing machine, or when using an electric drill. The radio or TV is positioned too close to the instrument. Battery power is low. The volume settings for all notes are set to the minimum level. Headphones are connected to the instrument. This is due to the limitations of the speaker. Low frequency sounds are produced using an external speaker at a high volume. The sound of the instrument is resonant with the closet, windowpane or other objects close to the instrument. A low-power rated speaker is connected to the instrument. The backup lithium battery's power is low. The display may be hard to read depending on the angle. Battery power is low. Solution This indicates that the device is operating and is nothing to worry about. If you are using external speakers, please turn down the volume on the amplifier before switching the power ON. Use an AC outlet that is as far away as possible from the device or machine that may be causing the noise. If you cannot find the source of the noise, please contact the dealer from whom you purchased the instrument. Position the radio or TV as far away as possible from the instrument. Use the AC power adaptor or replace all six batteries with a new set. Set the volume to any level other than the minimum level. Disconnect the headphones from the instrument. Connect the instrument to a keyboard amplifier, etc. Reduce the volume. Remove the objects that are resonating. Connect a high-power rated speaker. A speaker rated 100 W or more is recommended when using this instrument for a concert band. Contact the dealer from whom you purchased the instrument and have the battery replaced. Adjust the CONTRAST dials on the rear panel. Use the AC power adaptor or replace all six batteries with a new set. 22