Yamaha MX61 Reference Manual - Page 52

Performance Song/Pattern File Utility Remote Voice Ctrl Set (Voice Controller Set)/ DrumKit Ctrl Set (Drum Voice Controller Set) Up to six Controller Sets can be assigned to each Voice. Select a Set from Sets 1 - 6 by using the Cursor [V]/[E] buttons, then press [ENTER]. The Controller Set display is called up. Parameter Source Dest (Destination) Depth Description Determines which controller is to be assigned and used for the selected Controller Set. Settings: PB (Pitch Bend wheel), MW (Modulation wheel), AS1 (ASSIGN 1), AS2 (ASSIGN 2), FS (Footswitch), FC1 (Foot controller 1), FC2 (Foot Controller 2), BC (Breath controller), RB (Ribbon Controller), AF1 (ASSIGNABLE FUNCTION [1]), AF2 (ASSIGNABLE FUNCTION [2]), AT (Aftertouch) NOTE When the foot switch is set to a Control Change number of 96 or higher in the Controller display of the Utility, the footswitch will not be available as a "Source" of the Controller Set for the selected Voice. Determines the function that is controlled by the controller set in "Source." Settings: See the "Control List" in the "Data List" PDF document. Determines the degree to which the Source controller affects the Destination. Settings: -64 - +0 - +63 Setting examples of the Destination Here are some specific useful examples on how to set the "Dest" (Destination) assignments. To control the volume: To change the speed of the Rotary Speaker: To apply a wah pedal effect to the Voice: Volume Insertion Effect Parameter 1 (INSA:EfSpCtl) *1 Insertion Effect Parameter 1 (INSA:EfPdCtl ) *2 Concerning *1 and *2 respectively, the following settings are necessary in addition to the above settings. *1 Also set Effect type = "Rotary Sp" in the Voice Insert Eff/ DrumKit Insert Eff display of Voice Edit *2 Also set Effect type = "VCM Pedal Wah" in the Voice Insert Eff/ DrumKit Insert Eff display of Voice Edit Voice Name /DrumKit Name Determines the Voice name for the User Voice. Parameter Voice name Category (Voice category) Description Determines the Voice name which is assigned to the selected Part. Move the cursor to the desired location by using the Cursor [] buttons, and select the character by using the [DATA] dial. The names can contain up to 10 alphabetic and numeric characters. Determines the category to which the Voice will be registered. The categories are keywords representing the general characteristics of the Voices. Selecting the appropriate category makes it easy to find the desired Voice from the huge variety of Voices available. Settings: For Normal Voice: AP, KB, ORG, GTR, BAS, STR, BRS, WND, LD, PAD, CMP, CP, SFX, MFX, ETH For Drum Voice: DR NOTE For details about each category, refer to "Voice Category" of "Basic Structure" (page 7). Performance Performance Play Performance Select Performance Part Select Performance Edit Common Edit Chorus Eff Reverb Eff Master EQ Arp Switch General Name Part Edit Play Mode Filter/EG Arp Select Receive Switch Voice Edit Voice Insert Eff / DrumKit Insert Eff Voice LFO Voice Ctrl Set / DrumKit Ctrl Set Voice Name / DrumKit Name Voice Job Voice Store Performance Job Initialize Recall Copy Bulk Performance Store Supplementary Information MX49/MX61 Reference Manual 52