Yamaha RX-V363 Owner's Manual - Page 35

BASIC OPERATION ■ Selecting audio input jacks (AUDIO SELECT) This unit comes with a variety of input jacks. Use this feature (audio input jack select) to switch the input jack assigned to an input source when more than one jacks are assigned to an input source. y • We recommend setting audio input jack select to "AUTO" in most cases. • You can adjust the default audio input jack select of this unit by using "AUDIO SELECT" in "OPTION MENU" (see page 50). Press OAUDIO SELECT (or press 4AMP and then CAUDIO SEL) repeatedly to select the desired Audio input jack select setting. DVR V-AUX DTV/CBL DVD MD/CD-R TUNER CD A.SEL: AUTO Audio input jack select setting AUTO ANALOG Automatically selects input signals in the following order: (1) Digital signals (2) Analog signals Selects only analog signals. If no analog signals are input, no sound is output. Note This feature is not available when no digital input jack are assigned to the currently selected input source. ■ Selecting the night listening mode The night listening modes are designed to improve listenability at lower volumes or at night. 1 Press 4AMP and then press MNIGHT repeatedly to select "NIGHT:CINEMA" or "NIGHT:MUSIC". Choices: NIGHT:CINEMA, NIGHT:MUSIC, NIGHT OFF • Select "NIGHT:CINEMA" to reduce the dynamic range of film soundtracks and make dialog easier to hear at lower volumes. • Select "NIGHT:MUSIC" to preserve ease-of-listening for all sounds. • Select "NIGHT OFF" if you do not want to use this feature. y When a night listening mode is selected, the NIGHT indicator lights up in the front panel display. Playback 2 Press 7l / h to adjust the effect level while "NIGHT:CINEMA" or "NIGHT:MUSIC" is displayed in the front panel display. Choices: MIN, MID, MAX • Select "MIN" for minimum compression. • Select "MID" for standard compression. • Select "MAX" for maximum compression. y "NIGHT:CINEMA" and "NIGHT:MUSIC" adjustments are stored independently. Notes • You cannot use the night listening modes in the following cases: - when the component connected to the MULTI CH INPUT jacks is selected as the input source. - when headphones are connected to the PHONES jack. - when the sampling frequency of the input sources are higher than 96 kHz. • The night listening modes may vary in effectiveness depending on the input source and surround sound settings you use. ■ Adjusting the tonal quality Use this feature to adjust the balance of bass and treble for the front left and right speaker channels. Press JTONE CONTROL repeatedly to select "BASS" or "TREBLE" and then press KPROGRAM l / h to adjust the corresponding frequency response level. Control range: -10 to +10 dB Control step: 2 • Select "BASS" to adjust the low-frequency response. • Select "TREBLE" to adjust the high-frequency response. Notes • Speaker and headphone adjustments are stored independently. • If you increase or decrease the high-frequency or low-frequency sound to an extreme level, the tonal quality of the surround speakers may not match that of the front left and right speakers. English 31 En