Yamaha RX-V363 Owner's Manual - Page 58

Advanced setup, Speaker impedance, U.S.A. and Canada models only, Tuner frequency step

Page 58 highlights

Advanced setup Advanced setup This unit has additional menus that are displayed in the front panel display. The advanced setup menu offers additional operations to adjust and customize the way this unit operates. Change the initial settings (indicated in bold under each parameter) to reflect the needs of your listening environment. Notes • Only ASTANDBY/ON, KPROGRAM l / h and LSTRAIGHT are effective while you are using the advanced setup menu. • No other operations can be made while you are using the advanced setup menu. • The advanced setup menu is only available in the front panel display. 1 Press ASTANDBY/ON on the front panel to set this unit to the standby mode. 2 Press and hold JTONE CONTROL and then press ASTANDBY/ON to turn on this unit. This unit turns on, and the advanced setup menu appears in the front panel display. 3 Press KPROGRAM l / h to select the parameter you want to adjust. The name of the selected parameter appears in the front panel display. 4 Press LSTRAIGHT repeatedly to change the selected parameter setting. 5 Press ASTANDBY/ON to confirm your selection and set this unit to the standby mode. y The settings you made are reflected next time you turn on this unit. ■ Speaker impedance SP IMP. (U.S.A. and Canada models only) Use this feature to set the speaker impedance of this unit so that it matches that of your speakers. Choices: 8ΩMIN, 6ΩMIN • Select "8ΩMIN" to set the speaker impedance to 8 Ω . • Select "6ΩMIN" to set the speaker impedance to 6 Ω . SP IMP. Speaker Impedance level 8ΩMIN Front (A or B) Center Surround The impedance of each speaker must be 8 Ω or higher. 6ΩMIN Front (A or B) Center Surround The impedance of each speaker must be 6 Ω or higher. ■ Tuner frequency step TU (Asia and General models only) Use this feature to set the tuner frequency step according to the frequency spacing in your area. Choices: AM10/FM100, AM9/FM50 • Select "AM10/FM100" for North, Central and South America. • Select "AM9/FM50" for all other areas. ■ Initializing PRESET Use this feature to reset all the parameters of this unit to the initial factory settings. Choices: CANCEL, RESET • Select "CANCEL" not to reset any parameters of this unit. • Select "RESET" to reset the parameters of this unit. Notes • This setting completely resets all the parameters of this unit including the set menu parameters. However, the advanced setup menu parameters will not be initialized. • The initial factory settings are activated next time you turn on this unit. 54 En

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78

Advanced setup
54
En
This unit has additional menus that are displayed in the
front panel display. The advanced setup menu offers
additional operations to adjust and customize the way this
unit operates. Change the initial settings (indicated in bold
under each parameter) to reflect the needs of your
listening environment.
• Only
A
STANDBY/ON
,
K
PROGRAM
l
/
h
and
L
STRAIGHT
are effective while you are using the advanced
setup menu.
No other operations can be made while you are using the
advanced setup menu.
The advanced setup menu is only available in the front panel
display.
1
Press
A
STANDBY/ON
on the front panel to
set this unit to the standby mode.
2
Press and hold
J
TONE CONTROL
and
then press
A
STANDBY/ON
to turn on this
unit.
This unit turns on, and the advanced setup menu
appears in the front panel display.
3
Press
K
PROGRAM
l
/
h
to select the
parameter you want to adjust.
The name of the selected parameter appears in the
front panel display.
4
Press
L
STRAIGHT
repeatedly to change
the selected parameter setting.
5
Press
A
STANDBY/ON
to confirm your
selection and set this unit to the standby
mode.
y
The settings you made are reflected next time you turn on this
unit.
Speaker impedance
SP IMP.
(U.S.A. and Canada models only)
Use this feature to set the speaker impedance of this unit
so that it matches that of your speakers.
Choices:
8
MIN
, 6
MIN
Select “8
MIN” to set the speaker impedance to 8
.
Select “6
MIN” to set the speaker impedance to 6
.
Tuner frequency step
TU
(Asia and General models only)
Use this feature to set the tuner frequency step according
to the frequency spacing in your area.
Choices:
AM10/FM100
, AM9/FM50
Select “AM10/FM100” for North, Central and South
America.
Select “AM9/FM50” for all other areas.
Initializing
PRESET
Use this feature to reset all the parameters of this unit to
the initial factory settings.
Choices:
CANCEL
, RESET
Select “CANCEL” not to reset any parameters of this
unit.
Select “RESET” to reset the parameters of this unit.
This setting completely resets all the parameters of this unit
including the set menu parameters. However, the advanced
setup menu parameters will not be initialized.
The initial factory settings are activated next time you turn on
this unit.
Advanced setup
Notes
SP IMP.
Speaker
Impedance level
8
MIN
Front (A or B)
The impedance of each
speaker must be 8
or
higher.
Center
Surround
6
MIN
Front (A or B)
The impedance of each
speaker must be 6
or
higher.
Center
Surround
Notes