Yamaha RX-V373BL User Manual - Page 52
Tone Control Tone Control, DSP/Surround DSP/Surround, Volume Trim Volume Trim, DSP Level DSP Level
View all Yamaha RX-V373BL manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 52 highlights
■ Tone Control (Tone Control) Adjusts the high-frequency range (Treble) and low-frequency range (Bass) of sounds. Choices Treble (Treble), Bass (Bass) Setting range -6.0 dB to +6.0 dB (0.5 dB increments) Default 0.0 dB • If you set an extreme value, sounds may not match those from other channels. Adjusting with the front panel controls a Press TONE CONTROL to select "Treble" or "Bass". b Press PROGRAM to make an adjustment. ■ DSP/Surround (DSP/Surround) Configures the sound field program and surround settings. ❑ DSP Level (DSP Level) Adjusts the sound field effect level. Setting range -6 dB to +3 dB (1 dB increments) Default 0 dB ❑ Adaptive DRC (A.DRC) Sets whether the dynamic range (from maximum to minimum) is automatically adjusted when the volume level is adjusted. When it is set to "On", it is useful for listening to playback at a low volume at night. Settings On (On) Off (Off) (default) Automatically adjusts the dynamic range. The dynamic range is not automatically adjusted. If "On" is selected, the dynamic range becomes narrow at a low volume and wide at a high volume. Volume: low Volume: high Output level Output level On Off Input level On Off Input level ❑ Enhancer (Enhancer) Enables/disables Compressed Music Enhancer (p.39). • This setting is applied separately to each input source. • You can also use ENHANCER on the remote control to enable/disable Compressed Music Enhancer (p.39). Settings Off (Off) On (On) Disables Compressed Music Enhancer. Enables Compressed Music Enhancer. Default USB, TUNER: On (On) Others: Off (Off) ■ Volume Trim (Volume Trim) Fine-adjusts volume difference between input sources or subwoofer volume. ❑ Input Trim (In.Trim) Corrects volume differences between input sources. If you are bothered by volume differences when switching between input sources, use this function to correct it. • This setting is applied separately to each input source. Setting range -6.0 dB to +6.0 dB (0.5 dB increments) Default 0.0 dB PLAYBACK ➤ Configuring playback settings for different playback sources (Option menu) En 52