Yamaha RX-V373BL User Manual - Page 57

Speaker Configures the speaker settings manually. Setup Speaker HDMI Sound ECO Function Language Configuration Distance Level Equalizer Test Tone ■ Configuration Configures the output characteristics of the speakers. • When you configure the speaker size, select "Large" if the woofer diameter of your speaker is 16 cm (6-1/4") or larger or "Small" if it is smaller than 16 cm (6-1/4"). ❑ Subwoofer Selects whether or not a subwoofer is connected. Settings Use (default) None Select this option when a subwoofer is connected. The subwoofer will produce LFE (low-frequency effect) channel audio and low-frequency components from other channels. Select this option when no subwoofer is connected. The front speakers will produce LFE (low-frequency effect) channel audio and low-frequency components from other channels. ❑ Front Selects the size of the front speakers. Settings Small (default) Large Select this option for small speakers. The subwoofer will produce front channel low-frequency components (configurable in "Crossover"). Select this option for large speakers. The front speakers will produce all of the front channel frequency components. • "Front" is automatically set to "Large" when "Subwoofer" is set to "None". ❑ Center Selects whether or not a center speaker is connected and its size. Settings Small (default) Large None Select this option for small speakers. The subwoofer or front speakers will produce center channel low-frequency components (configurable in "Crossover"). Select this option for large speakers. The center speaker will produce all of the center channel frequency components. Select this option when no center speaker is connected. The front speakers will produce center channel audio. ❑ Surround Selects whether or not surround speakers are connected and their sizes. Settings Small (default) Large None Select this option for small speakers. The subwoofer or front speakers will produce surround channel low-frequency components (configurable in "Crossover"). Select this option for large speakers. The surround speakers will produce all of the surround channel frequency components. Select this option when no surround speakers are connected. The front speakers will produce surround channel audio. Virtual CINEMA DSP works when you select a sound program. ❑ Crossover Sets the lower limit of the low-frequency components that can be output from a speaker whose size is set to "Small". A frequency sound lower than the specified value will be produced from the subwoofer or front speakers Settings 40 Hz, 60 Hz, 80 Hz (default), 90 Hz, 100H z, 110 Hz, 120 Hz, 160 Hz, 200 Hz • If the volume and crossover frequency are adjustable on your subwoofer, set the volume to half and crossover frequency to maximum. CONFIGURATIONS ➤ Configuring various functions (Setup menu) En 57