Yamaha RX-V373BL User Manual - Page 66

Changing the FM/AM tuning frequency setting (TU) (Asia and General models only) TU FM50/AM9 Change the FM/AM tuning frequency setting of the unit depending on your listening environment. Settings FM100/AM10 Select this when you want to adjust the FM frequency by 100-kHz steps and AM by 10-kHz steps. FM50/AM9 (default) Select this when you want to adjust the FM frequency by 50-kHz steps and AM by 9-kHz steps. Switching the video signal type (TV FORMAT) TV FORMAT NTSC Switch the video signal type of HDMI output so that it matches to the format of your TV. Since the unit automatically selects the video signal type so that it matches to the TV, it is unnecessary to change the setting normally. Change the setting only when images on the TV screen do not appear correctly. Settings NTSC, PAL Default U.S.A., Canada, Korea and General models: NTSC Other models: PAL Restoring the default settings (INIT) INIT CANCEL Restores the default settings for the unit. Choices ALL CANCEL Restores the default settings for the unit. Does not perform an initialization. Updating the firmware (UPDATE) UPDATE USB New firmware that provides additional features or product improvements will be released as needed. Updates can be downloaded from our website. For details, refer to the information supplied with updates. ■ Firmware update procedure Do not perform this procedure unless firmware update is necessary. Also, make sure you read the information supplied with updates before updating the firmware. 1 Save the downloaded firmware to the root folder of a USB memory device. 2 Press PROGRAM on the front panel to select "UPDATE". 3 Connect the USB memory device to the USB jack. 4 To start firmware update, press INFO on the front panel. Checking the firmware version (VERSION) VERSION xx.xx Check the version of firmware currently installed on the unit. CONFIGURATIONS ➤ Configuring the system settings (ADVANCED SETUP menu) En 66