Yamaha RX-V373BL User Manual - Page 76

To use HDMI Control, you need to perform the following HDMI Control link setup after connecting the TV and playback devices. • This setup is required every time you add a new HDMI Control-compatible device to your system. 1 Turn on the unit, TV, and playback devices. 2 Enable HDMI Control on the unit, TV, and playback devices (such as HDMI Control-compatible BD/DVD players). To enable HDMI Control on the unit, set "HDMI Control" (p.59) in the "Setup" menu to "On" and configure the related items ("TV Audio Input", "Standby Sync", "ARC", and "SCENE"). 3 Turn off the main power of the TV and then turn off the unit and playback devices. 4 Turn on the unit and playback devices and then turn on the TV. 5 Switch the TV input to display the video from the unit. 6 Check the followings. On the unit: The input to which the playback device is connected is selected. If not, select the input source manually. On the TV: The video from the playback device is displayed. 7 Check that the unit is properly synchronized with the TV by turning off the TV or adjusting the TV volume with the TV remote control. • If HDMI Control does not work properly, try unplugging the TV in Step 2 and plugging in the TV again in Step 3. It may solve the problem. Also, HDMI Control may not work if the number of connected devices exceeds the limit. In this case, disable HDMI Control on the devices not in use. • If the unit is not synchronized to the TV's power operations, check the priority of the audio output setting on the TV. • We recommend using TV and playback devices from the same manufacturer so that HDMI Control works more effectively. HDMI signal compatibility Audio signals Audio signal type 2ch Linear PCM Multichannel Linear PCM DSD Bitstream Bitstream (High definition audio) Audio signal format 2ch, 32 to 192 kHz, 16/20/24 bit 8ch, 32 to 192 kHz, 16/20/24 bit 2/5.1ch, 2.8224 MHz, 1 bit Dolby Digital, DTS Dolby TrueHD, Dolby Digital Plus, DTS-HD Master Audio, DTS-HD High Resolution Audio, DTS Express Compatible media (example) CD, DVD-Video, DVD-Audio DVD-Audio, BD (Blu-ray disc), HD DVD SACD DVD-Video BD (Blu-ray disc), HD DVD Video signals The unit is compatible with the video signals of the following resolutions: • 480i/60 Hz • 576i/50 Hz • 480p/60 Hz • 576p/50 Hz • 720p/60 Hz, 50 Hz • 1080i/60 Hz, 50 Hz • 1080p/60 Hz, 50 Hz, 24 Hz • 3840 x 2160p/30 Hz, 25 Hz, 24 Hz (4K signals) • 4096 x 2160p/24 Hz (4K signals) • When CPPM copy-protected DVD-Audio is played back, video/audio signals may not be output, depending on the type of the DVD player. • The unit is not compatible with HDCP-incompatible HDMI or DVI devices. For details, refer to the instruction manual for each device. • To decode audio bitstream signals on the unit, set the input source device appropriately so that the device outputs the bitstream audio signals directly (does not decode the bitstream signals on the playback device). For details, refer to the instruction manual for the playback device. APPENDIX ➤ Information on HDMI En 76