Yamaha RX-V4600 MCXSP10 Manual - Page 21
FRONT terminals, CENTER terminals, SUBWOOFER jack, PRESENCE terminals, PREPARATION
UPC - 027108922683
View all Yamaha RX-V4600 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 21 highlights
■ FRONT terminals Connect one or two speaker systems to these terminals. If you use only one speaker system, connect it to either of the FRONT A or B terminals. Note The Canada model cannot output to two separate speaker systems simultaneously. Bi-wired connection The unit also allows you to make bi-wired connections to one speaker system. Use two pairs of speaker cables for each speaker (one pair for the woofer and one pair for the tweeter/mid-range). To use the bi-wired connections, press SPEAKERS A and SPEAKERS B on the front panel so that both SP A and B light up on the front panel display. Bi-wired connection R+ -A - +L FRONT + -B - + This unit ■ CENTER terminals Connect a center speaker to these terminals. ■ SURROUND terminals Connect surround speakers to these terminals. ■ SUBWOOFER jack Connect a subwoofer with a built-in amplifier, such as the YAMAHA Active Servo Processing Subwoofer System, to this jack. ■ SURROUND BACK terminals Connect surround back speakers to these terminals. If you only connect one surround back speaker, connect it to the left (L) terminals. ■ PRESENCE terminals Connect presence speakers to these terminals. Note You can also use these terminals to connect Zone 2 speakers (see page 83). SPEAKER SETUP 17 PREPARATION