Yamaha RX-V4600 MCXSP10 Manual - Page 44

PLAYBACK Selecting audio input modes This unit comes with a variety of input jacks. You can select the type of input signal you want to use as follows. Press AUDIO SELECT to select an input mode. In most cases, use AUTO. AUDIO SELECT or POWER TV POWER AV STANDBY SYSTEM POWER A B AUDIO SELECT SLEEP PHONO TUNER CD MULTI CH IN Front panel Remote control ■ Displaying information about the input source You can display the type, format and sampling frequency of the current input signal. 1 Set AMP/SOURCE/TV to AMP, then press TOP on the remote control. The top display appears. AMP SOURCE TV TOP TITLE V-AUX DVR/VCR2 VCR 1 CBL/SAT DTV DVD MD/TAPE CD-R SP A A.SEL: AUTO CD TUNER PHONO dB VOLUME LR Input mode AUTO Automatically selects input signals in the following order: 1) i.LINK 2) HDMI 3) Digital signals* 4) Analog signals i.LINK Selects only i.LINK signals. If no i.LINK signals are input, no sound is output. HDMI Selects only HDMI signals. If no HDMI signals are input, no sound is output. COAX/OPT Selects digital signals input at the OPTICAL or COAXIAL jacks. Use if i.LINK or HDMI signals are also being input. ANALOG Selects only analog signals. If no analog signals are input, no sound is output. * If this unit detects a Dolby Digital or DTS signal, the decoder automatically switches to the appropriate sound field program. y • You can adjust the default input mode this unit selects when the power is turned on (see page 56). • DTS mode is recommended for playback of a CD or LD encoded in DTS. Note If the digital output data of the player has been processed in any way, you may not be able to perform DTS decoding even if you make a digital connection between this unit and the player. Stereo/Surround Input Select Manual Setup Auto Setup System Memory Sound Basic Option 2 Press n repeatedly to select Audio Info. The following information appears in the display. Auto Setup System Memory Audio Info. Format Sampling Channel Bitrate Dialogue Flag1 Flag2 Analog --2/0/----------- Format Signal format display. When the unit cannot detect a digital signal it automatically switches to analog input. Sampling Sampling frequency. When the unit is unable to detect the sampling frequency "?" appears. Channel Number of source channels in the input signal. For example, a multi-channel soundtrack with 3 front channels, 2 surround channels and LFE, is displayed as "3/2/0.1". Bitrate Bit rate. When the unit is unable to detect the bit rate "- - -" appears. Dialogue Dialogue normalization information for Dolby Digital signals. Flag1/Flag2 Flag data encoded with DTS or Dolby Digital signals that cue this unit to automatically switch decoders. 3 Press EXIT. 40