Yamaha RX-V4600 MCXSP10 Manual - Page 29
Connecting the power cable, AC OUTLETS SWITCHED, VOLTAGE SELECTOR, Asia and General models only
UPC - 027108922683
View all Yamaha RX-V4600 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 29 highlights
PREPARATION Connecting the power cable AC IN AC OUTLETS SWITCHED (U.S.A. model) VOLTAGE SELECTOR VOLTAGE SELECTOR CONNECTIONS ■ Connecting the AC power cable Plug the power cable into the AC inlet after all other connections are complete, then plug the power cable to an AC wall outlet. CAUTION Do not use other AC power cables. Use the provided cable. Use of other power cables may result in fire hazard or electrical shock. ■ AC OUTLET(S) (SWITCHED) U.K. and Australia models 1 outlet Korea model None Other models 2 outlets Use these outlets to connect the power cables from your other components to this unit. Power to the AC OUTLET(S) is controlled by this unit's STANDBY/ON (or SYSTEM POWER and STANDBY). These outlets will supply power to any connected component whenever this unit is turned on. The maximum power (total power consumption of components) that can be connected to the AC OUTLET(S) is: Asia and General models 50 W Other models 100 W ■ VOLTAGE SELECTOR (Asia and General models only) The VOLTAGE SELECTOR on the rear panel of this unit must be set for your local main voltage BEFORE plugging into the AC main supply. Voltages are: General model .......AC 110/120/220/230-240 V, 50/60 Hz Asia model AC 220/230-240V, 50/60 Hz ■ Memory back-up The memory back-up circuit prevents the stored data from being lost even if this unit is in the standby mode. However if the power cable is disconnected from the AC wall outlet, or the power supply is cut for more than one week, the stored data will be lost. (Asia and General models) 25