Yamaha RX-V4600 MCXSP10 Manual - Page 87
Controlling Zone 2/Zone 3 from the front panel
UPC - 027108922683
View all Yamaha RX-V4600 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 87 highlights
Using this unit's internal amplifier To use this unit's internal amplifier, select "Internal" in Zone2 Amplifier 2 (page 67). ZONE 2/ZONE 3 R L + - PRESENCE/ ZONE 2 Second room This unit Controlling Zone 2/Zone 3 from the front panel You can control the input or adjust the volume level for Zone 2 and Zone 3 components using ZONE CONTROL on the front panel. 3 Press ZONE CONTROL on the front panel repeatedly to choose the zone you selected in step 2. ZONE CONTROL 1 Set REC OUT/ZONE 2 on the front panel to SOURCE/REMOTE. SOURCE/ DVD REMOTE MD/TAPE DTV CD-R CBL/SAT TUNER VCR 1 CD DVR/ VCR 2 REC OUT/ZONE 2 2 Press MAIN, ZONE 2 or ZONE 3 to select the zone you want to change the input for or adjust the volume level. ZONE ON/OFF MAIN ZONE 2 ZONE 3 Press each button repeatedly to turn the respective zone on or off. You can choose from the following modes: ZONE2 ZONE3 MAIN Controls the Zone 2 component connected to the ZONE 2 AUDIO L/R jacks on this unit. Controls the Zone 3 component connected to the ZONE 3 AUDIO L/R jacks on this unit. Controls the main component (this unit). Each time you press ZONE CONTROL, the front panel display changes as shown below, and the indicator for the currently selected zone flashes for approximately 5 seconds. ZONE 2 ZONE 3 MAIN y • You must complete this step within 5 seconds of pressing ZONE CONTROL on the front panel. Otherwise, the zone mode selection process is automatically canceled. In this case, press ZONE CONTROL again. • The initial setting is "ZONE 2" when both the Zone 2 and Zone 3 components connected to this unit are turned on. • If you selected MAIN in step 2, no indicator flashes on the front panel display when ZONE CONTROL is pressed. 4 Use the INPUT or VOLUME selector on the front panel to switch the input or adjust the volume level for the selected zone component. VOLUME INPUT or y You must complete this step within 5 seconds of performing step 2. Otherwise, the zone mode selection process is automatically canceled. In this case, repeat steps 2 and 3 again. ADVANCED OPERATION 83