Yamaha RX-V4600 MCXSP10 Manual - Page 32

AUTO SETUP Starting the setup For best results, make sure the room is as quiet as possible during the auto setup procedure (YPAO). If there is too much ambient noise, the results may not be satisfactory. y If your subwoofer has adjustable volume and crossover/high cut frequency controls, set the volume between 9 and 11 o'clock (as viewed on a conventional clockface) and set the crossover/high cut frequency to the maximum. VOLUME CROSSOVER/ HIGH CUT MIN MAX MIN MAX Subwoofer 1 Switch on this unit and video monitor. 2 Set AMP/SOURCE/TV to AMP, then press TOP on the remote control. The top display appears. AMP SOURCE TV TOP TITLE 4 Press k / n repeatedly to select Setup Menu, then press h. Information Setup Menu Setup Type Start Wiring Distance Size 5 Press k / n repeatedly to select Wiring, Distance, Size, Equalizing or Level, then press h. Wiring Distance Size Wiring Distance Size Equalizing Level Skip Check Skip Check Size Equalizing Level Wiring Distance Size Equalizing Distance Size Equalizing Level Skip Check Skip Check Skip Check: Natural Check: Flat Check: Front Stereo/Surround Input Select Manual Setup Auto Setup System Memory Sound Basic Option 3 Press k / n repeatedly to select Auto Setup, then press h. PRESET PRESET ENTER A/B/C/D/E ENTER A/B/C/D/E y Equalizing is also available in the front panel display system options menu (see page 87). 6 For Wiring, Distance, Size or Level, select: Check Skip To automatically check and adjust the selected item. To skip the selected item and perform no adjustments. y When using THX speakers, select "Skip" for Size and make sure that "Small" or "Small x2" is selected in Speaker Set (page 62) and that "80Hz" is selected in Bass Cross Over (page 63). Input Select Manual Setup Auto Setup System Memory Audio Info. Information Setup Menu Setup Type Start 28