Yamaha RX-V4600 MCXSP10 Manual - Page 35

Troubleshooting for the auto setup procedure, Before auto setup, During auto setup

Get Yamaha RX-V4600 - AV Receiver PDF manuals and user guides
UPC - 027108922683
View all Yamaha RX-V4600 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 35 highlights

PREPARATION ■ Troubleshooting for the auto setup procedure Before auto setup Error message Connect MIC! Cause Optimizer microphone is not connected. Unplug Phones! No Setup Menu! Memory Guard! Headphones are connected. No setup menu items have been selected. This setting is protected. AUTO SETUP Remedy • Connect the supplied optimizer microphone to the OPTIMIZER MIC jack on the front panel. • Unplug the headphones. • Select at least one setup menu item. • Remove the protection setting for auto setup (see page 68). During auto setup Press l / h to display detailed information for individual errors. Select Retry to try the auto setup procedure again. Error message Cause Remedy E01:No Front SP E02:No Sur. SP E03:No Pres. SP E04:SBR ->SBL E05:Noisy E06:Check Sur. E07:No MIC E08:No Signal E09:User Cancel E10:Internal Err Front L/R channel signal(s) is (are) not detected. • Select the front speakers by pressing SPEAKERS A or B on the front panel (or by setting AMP/SOURCE/TV to AMP, then pressing SPEAKERS A or B on the remote control). • Check the front L/R speaker connections. Only one surround channel signal is detected. • Check the surround speaker connections. Only one presence channel signal is detected. • Check the presence speaker connections. Only the surround back right channel signal is detected. • Connect the surround back speaker to the LEFT SURROUND BACK SPEAKERS terminal if you only have one surround back speaker. Background noise is too loud. • Try auto setup in a quiet environment. • Turn off noisy electric equipment like air conditioners, or move them away from this unit. Surround back speaker(s) is (are) connected, though surround L/R speakers are not. • Connect surround speakers when using (a) surround back speaker(s). The optimizer microphone was unplugged during the auto setup procedure. • Connect the supplied optimizer microphone to the OPTIMIZER MIC jack on the front panel. The optimizer microphone does not detect test • Check the microphone setting. tones. • Check the speaker connections and placement. The auto setup procedure was cancelled because a setting that affects auto setup (such as changing speaker settings, etc.) was changed during the procedure. • Perform the auto setup procedure again. An internal error occurred. • Restart this unit, then try the auto setup procedure again. 31

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
31
AUTO SETUP
PREPARATION
■
Troubleshooting for the auto setup procedure
Before auto setup
During auto setup
Press
l
/
h
to display detailed information for individual errors. Select Retry to try the auto setup procedure again.
Error message
Cause
Remedy
Connect MIC!
Optimizer microphone is not connected.
•
Connect the supplied optimizer microphone to the
OPTIMIZER MIC jack on the front panel.
Unplug Phones!
Headphones are connected.
•
Unplug the headphones.
No Setup Menu!
No setup menu items have been selected.
•
Select at least one setup menu item.
Memory Guard!
This setting is protected.
•
Remove the protection setting for auto setup
(see page 68).
Error message
Cause
Remedy
E01:No Front SP
Front L/R channel signal(s) is (are) not
detected.
•
Select the front speakers by pressing
SPEAKERS A or B on the front panel
(or by setting AMP/SOURCE/TV to AMP,
then pressing SPEAKERS A or B on the remote
control).
•
Check the front L/R speaker connections.
E02:No Sur. SP
Only one surround channel signal is detected.
•
Check the surround speaker connections.
E03:No Pres. SP
Only one presence channel signal is detected.
•
Check the presence speaker connections.
E04:SBR ->SBL
Only the surround back right channel signal is
detected.
•
Connect the surround back speaker to the LEFT
SURROUND BACK SPEAKERS terminal if you
only have one surround back speaker.
E05:Noisy
Background noise is too loud.
•
Try auto setup in a quiet environment.
•
Turn off noisy electric equipment like air
conditioners, or move them away from this unit.
E06:Check Sur.
Surround back speaker(s) is (are) connected,
though surround L/R speakers are not.
•
Connect surround speakers when using (a) surround
back speaker(s).
E07:No MIC
The optimizer microphone was unplugged
during the auto setup procedure.
•
Connect the supplied optimizer microphone to the
OPTIMIZER MIC jack on the front panel.
E08:No Signal
The optimizer microphone does not detect test
tones.
•
Check the microphone setting.
•
Check the speaker connections and placement.
E09:User Cancel
The auto setup procedure was cancelled
because a setting that affects auto setup (such as
changing speaker settings, etc.) was changed
during the procedure.
•
Perform the auto setup procedure again.
E10:Internal Err
An internal error occurred.
•
Restart this unit, then try the auto setup procedure
again.